Acrylic Eggcrate Louver
1/2″ (13mm) cube plastic louvers are accepted as the worldwide standard. Acrylic White Eggcrate provides efficiency, economy and moderately controlled luminance. The 23 5/8″ x 47 5/8″ panels feature half lap perimeter detailing to facilitate an unbroken appearance when parts are butt joined.
Non-parabolic louvers are a very economical solution to many lighting and luminous ceiling applications. These louvers are molded from acrylic materials. The white panels are translucent and provide uniform illumination throughout the entire surface. Open cell design allows the light to be transmitted to the working area while reducing glare. In addition, this louver allows nearly unobstructed air movement which will increase the bulb and ballast longevity through more efficient heat dissipation. The eggcrate louver is approved by UL for use under sprinkler systems and can be used in lighting fixture or luminous ceiling applications.
Standard Sheet sizes are listed below.
We custom cut to your requested size and offer immediate cutting on small quantities. On large quantities we offer 1-3 day turn around time, depending on current stock & schedules.
- 1/2″ Thick / Cell size 1/2 x 1/2 – White
- 3/8″ Thick / Cell size 1/2 x 1/2 – Black
Blank Stock Size
- 23.625 x 47.625
All of our acrylic lens’ will maintain clarity for years as long as proper cleaning and maintenance methods are utilized. Never clean acrylic with standard glass cleaners, as the main ingredients are alcohol and/or ammonia. Both will severely impact acrylic and cause cracking and cloudy properties. At damp cloth or mild soapy water will be sufficient.